Whether you’re building new, finishing your basement, or renovating a room in your Calgary home, drywall installation is the foundation of every interior wall and ceiling finish. Getting it right matters — because bad drywall shows through every coat of paint.

This guide covers everything you need to know before hiring a drywall contractor in Calgary.

Drywall contractor Calgary

Types of Drywall Used in Calgary Homes

Not all drywall is the same. The right board depends on where it’s going and what it needs to do:

  • Standard 1/2″ drywall — Used on most interior walls and ceilings in residential projects
  • 5/8″ Type X (fire-rated) — Required by Alberta Building Code in garages, utility rooms, and suites
  • Moisture-resistant board — Used in bathrooms, laundry rooms, and Calgary basements where moisture is a concern
  • Soundboard — Used between suites or media rooms for noise reduction

A good Calgary drywall contractor will specify the right board for each area of your project without you having to ask.

Understanding Drywall Finish Levels

Drywall finish is rated from Level 0 to Level 5. Most Calgary residential projects call for Level 4, which is suitable for flat, eggshell, and satin paints. Here’s a quick breakdown:

  • Level 3 — Textured finishes only (like heavy knockdown)
  • Level 4 — Standard residential finish — ready for most paints
  • Level 5 — Skim-coat finish for high-gloss paint or critical lighting

For taping and mudding in Calgary, we deliver Level 4 as standard and Level 5 on request.

The Drywall Installation Process Step by Step

  1. Measure and cut — Sheets are measured and cut to fit, minimizing waste and seams
  2. Hang and fasten — Sheets are screwed to studs at correct intervals to prevent popping
  3. Corner bead — Metal or vinyl bead is applied to all outside corners
  4. Ready for taper — Hung boards are handed off for taping and mudding

How Much Does Drywall Installation Cost in Calgary?

Drywall installation in Calgary is typically priced per sheet or per square foot:

  • Hanging only: $1.50–$2.50 per sq ft
  • Tape and mud (finishing): $1.00–$2.00 per sq ft
  • Full hang + finish: $2.50–$4.50 per sq ft depending on finish level

For a standard 1,000 sq ft basement in Calgary, expect $3,000–$6,000 for drywall and finishing combined.

Questions to Ask Your Calgary Drywall Contractor

  • Do you supply materials or do I?
  • What finish level is included in your quote?
  • How do you handle textured ceilings? (See our ceiling texture services)
  • Do you do clean-up, or will there be drywall dust left behind?

Why NeverFold Construction for Drywall in Calgary?

Our crew has been hanging and finishing drywall across Calgary — from Airdrie to Chestermere to Cochrane — for over a decade. Every sheet is levelled, every corner is straight, and we clean up before we leave.

Get a free drywall quote today — we respond within 24 hours and offer free on-site estimates across Calgary.

Professional Basement Development, Drywall & Renovations in Calgary.

Start Your Project

Tell us about your project and we will get back to you within 24 hours with a free estimate.

Project Inquiry

Never Fold Construction

Start Your Project

Tell us about your project and we will get back to you within 24 hours with a free estimate.

  • Free no-obligation estimate
  • Licensed & insured team
  • Serving Calgary & area
  • Response within 24 hours

Project Inquiry